Access List Configuration－dymyme99

Access List Configuration

.. With both tcp and udp a specific source and& .. Cisco has released an .ADVANCED Access Lists (ACL) Configuration.0 0...access-list 1 permit 192 access list configuration .The configuration is going to be all done on PCI-RTR-1. and how it can be used to perform basic access control.Ciscoasa(config)#access-list name [line number] [extended] deny protocol source_IP_address source_netmask [operator source_port] destination_IP_address destination_netmask [operator destination_port] [log [[disable& ..Access Control List (ACL) configuration and deployment is covered in this series about securing networks.. TIP: ACL is applied directly to the interface using the "ip access-group" command: (config-subif)#ip access-group EXTENDED_OR_STANDARD_ACL [in | out] TIP: Watch out not& ..

Access Control List (ACL) configuration and deployment is covered in this series about securing networks.. TIP: ACL is applied directly to the interface using the "ip access-group" command: (config-subif)#ip access-group EXTENDED_OR_STANDARD_ACL [in | out] TIP: Watch out not& .... We only want to permit telnet& .For extended ACLs, the access-list-number is set to a range from 100-199 or 2000-2699. There are a number of different protocols that can be configured including ip, tcp, and udp.You don`t want to permit everything,by default the implicit deny at the bottom of the ACL and just create an ACL that permits what you going to take action on in the route-map

. We only want to permit telnet& .For extended ACLs, the access-list-number is set to a range from 100-199 or 2000-2699. There are a number of different protocols that can be configured including ip, tcp, and udp.You don`t want to permit everything,by default the implicit deny at the bottom of the ACL and just create an ACL that permits what you going to take action on in the route-map.168..255 access-list 100 permit udp any any eq bootpc access-list 101 remark auto generated by SDM firewall configuration access-list 101 remark SDM_ACL Category=1 access-list 101 deny& . ip access-list extended citrix-vh permit tcp any eq 2599 any ip access-list extended citrix-h permit tcp any eq 2598 any ip access-list extended citrix-m permit tcp any eq 2600 any ip access-list extended citrix-l permit tcp any eq 2601 any. Next we define our access-list

168..255 access-list 100 permit udp any any eq bootpc access-list 101 remark auto generated by SDM firewall configuration access-list 101 remark SDM_ACL Category=1 access-list 101 deny& . ip access-list extended citrix-vh permit tcp any eq 2599 any ip access-list extended citrix-h permit tcp any eq 2598 any ip access-list extended citrix-m permit tcp any eq 2600 any ip access-list extended citrix-l permit tcp any eq 2601 any. Next we define our access-list... With both tcp and udp a specific source and& .. Cisco has released an